Canon at this time introduced a extra reasonably priced lens possibility designed for social media creators and videographers fascinated with VR and 3D content material creation.
Again in June, Canon introduced its RF-S3.9mm F3.5 STM Twin Fisheye lens, which was designed to permit its line of cameras to take spatial video and photographs—priced at $1,099.00.
Now the corporate is widening its line of twin lens optics with an much more reasonably priced VR lens system with the introduction of RF-S7.8mm F4 STM DUAL lens, which is happening sale this November for $449.99.
Because the identify suggests, the lens provides a 7.8mm focal size, in addition to a 60-degree angle of view. Just like the beforehand launched Twin Fisheye lens, the brand new lens can be suitable with Canon’s newest cameras that assist RF mounts, which incorporates EOS R, R5, R6, RP, and the R7.
Whereas admittedly providing a decrease field-of-view (FOV) than the 144-degree FOV of its greater brother, it’s additionally lower than half the value.
Previewed at Apple’s 2024 WWDC, Canon intends to make use of the brand new lens to fulfill the rising demand for accessible spatial video creation.
Notably, the brand new RF-S7.8mm F4 STM DUAL lens is alleged to function like a standard 2D RF lens, enabling simple setup for newcomers, and permitting anybody with its newest RF mount cameras to create immersive content material for headsets like Apple Imaginative and prescient Professional and Meta Quest 3.
In response to Hiroto Kato, Canon’s vp of Imaging Merchandise & Options, the RF-S7.8mm F4 STM DUAL lens is “an thrilling step” in making 3D content material creation accessible.
“With the RF-S7.8mm F4 STM DUAL lens, Canon just isn’t solely offering a brand new visible instrument but in addition enhancing the best way creators talk utilizing rising VR, spatial and 3D applied sciences,” stated Kato says. “This lens permits customers to seize immersive content material, bridging the hole between conventional content material creation and the newest in VR and Spatial imagery. It’s an thrilling step ahead in making high-quality 3D content material extra approachable for everybody.”
The brand new twin lens is scheduled for launch in November 2024, priced at $449.99. Take a look at the specs beneath:
Specification | Element |
Focal Size | 7.8mm |
Most and Minimal Aperture |
f/4.0 – f/16 (1/3 stops, 1/2 stops) |
Lens Mount Sort |
Canon RF Mount; Plastic Mount |
Interpupillary Distance / Baseline Size | 11.8mm |
Minimal Focusing Distance |
0.49 ft. (5.9 in.) / 0.15 m |
Most Magnification | 0.07x |
Angle of View (Diagonal) | 63° 00′ |
Lens Building (every lens) | |
Particular Components (every lens) | |
Lens Coating | |
Filter Measurement Diameter | |
Rear Mounted Gelatin Filter Holder | Not Supported |
Aperture Blades (every lens) | 7 |
Lens Switches |
Left-right focus distinction adjustment mode swap |
Mud/Water Resistance | Not Supplied |
Focusing System | |
Left/proper focus distinction adjustment |
Supplied, user-adjustable utilizing the Management Ring |
Twin Pixel CMOS AF |
Supplied; Horizontal: approx. 30%, Vertical: approx. 46% |
Focus Information – Taking pictures Mode |
|
Picture Mode |
Left lens solely helps focus information |
Picture Mode with L/R adjustment swap enabled |
Each Left and Proper lenses assist focus information |
Video Mode |
Left lens solely helps focus information |
Video Mode with L/R adjustment swap enabled |
Each Left and Proper lenses assist focus information |
Full-time Guide Focusing |
Each Left and Proper lenses assist focus information |
Management Ring | Supplied |
Optical Picture Stabilization | Not Supplied |
Stabilization with in-body IS (EOS R7) | Not Supported |
Dimensions |
ø2.7″ x 1.6″ L (ø69.2mm x 41.5mm) |
Weight | |
Equipment |
|
Lens Hood | Not Supported |
Lens Cap | E-58II (bundled) |
Mud Cap |
Canon Lens Mud Cap RF (Bundled) |
Lens Case |
Canon Lens Case LP1014 (bought individually) |
Extension Tubes | Not suitable |
Shut-up Lenses 250D / 500D | Not suitable |
Canon RF Extender 1.4x/2x | Not suitable |
Canon Gelatin Filter Holder III/IV | Not suitable |
Rear Gelatin Filter Holder | Not suitable |